January
13,
2020 7047-910J
19
5100 Insert ACC
Corner Brackets
Figure 19.4
Figure 19.3
Secure 2 Side Surrounds to
Top Surround
Figure 19.5
SURROUND
ATTACH POINTS
STOVE TOP
Attachment Bar
Chimney Mounting Bar
5/16 Nuts
Attachment
Bar
5/16 Bolts
Figure 19.2
F. Surround & Trim Kit Installation
1.
Lay surround face down on a protected surface to
prevent scratching.
2. Using a Phillips head screw driver attach the side
surrounds to the top surround using 2 #8 sheet metal
screws provided with the kit
(Figure 19.3)
.
3.
Lay the trim face down and place the corner brackets
into position.
4.
Using a standard flat screw driver tighten the corner
brackets
(Figure 19.4)
.
5. Slide the trim over the surround set.
6. Install the surround set and trim set to the outer can.
Place the hook in the surround sides over the surround
attachment screws, 2 on each side
(Figure 19.5)
.
7. Place top on top of appliance.
Remove 2 screws from both sides.
Adjust the legs up or down to level
appliance.
Figure 19.1
D. Leveling Legs
1.
Remove the 2 screws already installed on each leg.
2. Move legs to the desired height
.
3. Re-install the screws to secure in place.
E. Securing Appliance to Stove Pipe/Liner
1.
Once you have the appliance in place and secured,
reach up through the flue opening and grab the
attachment bar and pull down inside flue opening
(
Figure
19.2)
.
2.
Insert the 5/16 bolts inside the cast flue and through
the chimney mounting bar. Securely tighten the nuts.
Fasteners are provided.
3.
Re-install the tube channel assembly, baffle board,
ceramic blanket and baffle protection channel.
