19
January 10, 2020
7045-910I
4100 Insert ACC
Flue Collar
Stove Pipe/Liner
Gasket
Figure 19.1
Remove 2 screws from both sides.
Adjust the legs up or down to level
appliance.
Figure 19.2
5/16 Nuts
Attachment
Bar
5/16 Bolts
Figure 19.3
B. Securing Stove Pipe/Liner to Flue Collar
1.
There are 4 already drilled holes in the flue collar 90
degrees apart. Attach the flue collar to the stove pipe/
liner. If the seal is questionable use high temperature
sealant such as stove mastic
(Figure 19.1)
.
2.
Attach gasket to bottom side of flue collar with a thin
coat of silicone.
C. Leveling Legs
1.
Remove the 2 screws already installed on each leg.
2. Move legs to the desired height.
3.
Re-install the screws to secure in place.
D. Securing Appliance to Stove Pipe/Liner
1.
Once you have the appliance in place and secured,
reach up through the flue opening and grab the
attachment bar and pull down inside flue opening
(Figure 19.3)
.
2.
Insert the 5/16 bolts inside the cast flue and through
the chimney mounting bar. Securely tighten the nuts.
Fasteners are provided.
3.
Re-install the tube channel assembly, baffle board,
ceramic blanket and baffle protection channel.