Safety Requirements
1.1
Power Connection
Before powering up your Mailing System, please check to ensure the system meets your
local AC voltage requirements. For more information on power specifications please refer
to the plates at the back of each System component.
• To reduce the risk of fire, only use the power cord supplied
with your Mailing System.
• Do not use this product on a wet floor or near water.
• Your system should be connected with a 19vdc - 2.6A limited
power source.
• In case of liquid spillage, disconnect the external power supply
from the wall plug and proceed then with cleaning up the spill.
• Use an outlet that is easily accessible. As the power supply cord is the equipment
disconnecting device, do not route the power cord between pieces of furniture or
over sharp edges.
• Avoid using outlets controlled by wall switches or shared by other equipment.
• Make sure there is no strain on the power supply cord.
3
| Page 3 | janv.-11-2012 15:55 |
