quadient DS-95i Manual Download Page 114

Page: 114 / 159

BCR advanced license

For the BCR advanced license the following functions are available:

• The basic functions (insert/accumulate, Customer ID).
• Sheet sequence - Every sheet has a number, regardless of the document set it is

part of. If a sheet is missing, an error is generated.

• Group sequence - Every document in a set has the same group number. If one

document set is missing, an error is generated.

• Divert (Divert & Continue) - The set will be diverted and the system continues.
• Stop (Divert & Stop) - The set will be diverted and the system stops indicating

error (FT1-RE1-000 Reading stop - Stop mark read).

• Selective feed - If the system reads the command, an enclosure from the enclosure

feeder is added to the set. This function is printed on the last sheet of a set. It is also
possible to add an enclosure from the versaFeeder(s).

• Sealing control - Determines if envelopes are sealed or not.
• Present on Deck & Continue - The set leaves the system from the upper unit. The

system does not stop processing. The envelopes are not sealed.

• Present on Deck & Stop - The set leaves the system from the upper unit. The system

stops. The envelopes are not sealed.

• Exit selection - Determines if the envelope is transported to stacker or to the side

exit.

OMR Code Description

Position of the code on the document

110

| Page 110 | Nov-26-2020 07:22 | Reading

English

Summary of Contents for DS-95i
































































































































































Search results

Summary of Contents for DS-95i

Reviews:

Related manuals for DS-95i

Brands by name

Popular brands

quadient DS-95i, Manual

Search results

Summary of Contents for DS-95i

Reviews:

Related manuals for DS-95i

Brands by name

Popular brands