quadient DS-95i Manual Download Page 143

Page: 143 / 159

Envelope Specifica-
tions

on page 145

Check specifications
and change envel-
opes if needed.

Envelope not within
specifications.

Flap is wrinkled and
sometimes not
opened.

Envelope Specifica-
tions

on page 145

Store envelopes ac-
cording to specifica-
tions.

Flap sticks.

Envelope Specifica-
tions

on page 145

Envelopes stored or
manufactured improp-
erly.

Flap curled.

Loading Envelopes

on page 72

Adjust envelope sep-
aration.

Separation set too
narrow.

Adjusting the envel-
ope insert fingers

page 43

Check fingers posi-
tion, adjust if needed.

Fingers adjusted too
deep into the envel-
ope.

Fingers are placed on
top of the envelope.

Verifying the Insert
Position

on page 42

Check envelope stop
position, adjust if
needed.

Envelope stops too
early.

Adjusting the envel-
ope insert fingers

page 43

Check fingers posi-
tion, adjust if needed.

Fingers not correctly
adjusted.

System stops while
inserting (stoppage at
the inserting point).

Editing a job

page 51

Check fold settings.

Inserted document
too long for used en-
velope.

Envelope Specifica-
tions

on page 145

Check envelope spe-
cifications.

Envelope throat incor-
rect.

Eliminate faulty envel-
opes.

Envelope glued in-
side.

Eliminate faulty envel-
opes.

Window not glued
properly.

English

139

| Page 139 | Nov-26-2020 07:22 | Fault Finding

Summary of Contents for DS-95i
































































































































































Search results

Summary of Contents for DS-95i

Reviews:

Related manuals for DS-95i

Brands by name

Popular brands

quadient DS-95i, Manual

Search results

Summary of Contents for DS-95i

Reviews:

Related manuals for DS-95i

Brands by name

Popular brands