quadient DS-95i Manual Download Page 113

Page: 113 / 159

Increased Reading Speed

To obtain an increased reading speed, resulting in a higher output, the following
requirements should be met:

• the reading marks / barcode should be printed between 7 mm and 85 mm measured

from the top of the sheet;

• do not use (selective) enclosures.

BCR license types

There are two BCR license types:

• Basic
• Advanced

BCR basic license

For the BCR basic license the following functions are available:

• Page N of M: as long as N is below M, the document set is not complete. As soon as

N=M, the set is complete and will be inserted into an envelope.

• Insert/Accumulate: defines when a document set is complete and must be inserted

into an envelope.

• Customer ID: BCR uses the Customer ID code to complete a set. If the ID changes,

the set is inserted. This is only possible with reverse reading (First of group).

At least one basic commands is required. Page N of M can be used in combination with
Customer ID as an integrity check.

English

109

| Page 109 | Nov-26-2020 07:22 | Reading

Summary of Contents for DS-95i
































































































































































Search results

Summary of Contents for DS-95i

Reviews:

Related manuals for DS-95i

Brands by name

Popular brands

quadient DS-95i, Manual

Search results

Summary of Contents for DS-95i

Reviews:

Related manuals for DS-95i

Brands by name

Popular brands