![background image](http://html1.mh-extra.com/html/qu-bit-electronix/chord-v2/chord-v2_manual_3334360015.webp)
SD Card Information
chord_config.txt
A number of additional settings can be configured by editing the config.txt file on your SD
card.
Here are the available options.
• QUANTIZE_AUTOHARM
• LONGFORM_USERBANK
• LFO_MODE
• LEAD_OFFSET
QUANTIZE_AUTOHARM
When enabled, this quantizes the V/Oct and Lead inputs to the appropriate scales when
Harm is enabled.
When disabled auto-harm modes are not quantized, and the modal interchange chords are
included.
This is similar to the V1 Chord.
Default Value: 1
LONGFORM_USERBANK
When enabled a single-file custom bank of waveforms will be a single bank of 64 waveforms
instead of 8 banks of 8 waveforms.
Default Value: 0
LFO_MODE
When enabled, the frequency of the chord is reduced below the audible spectrum. This
allows the chord to function as four LFOs
The new frequency range is 6 octaves lower than the normal range.
With voicing all the way down the root output will range from 4 seconds to 60Hz
All other voices are related.
15