![background image](http://html1.mh-extra.com/html/qu-bit-electronix/chord-v2/chord-v2_manual_3334360006.webp)
Installation
To install, locate 14HP of space in your Eurorack case and confirm the positive 12 volts and
negative 12 volts sides of the power distribution lines. Plug the connector into the power
distribution board of your case, keeping in mind that the red band corresponds to negative
12 volts. In most systems, the negative 12 volt supply line is at the bottom. The power cable
should be connected to the module with the red band facing the bottom of the module
6