User Manual
151.269 / 151.272
10
PART II Installation and Operation
Part III Maintenance and Cleaning
Please refer to the following points during the normal inspection:
Warning
: Make certain all screws and fasteners are securely tightened at all times.
Loosened screws may cause unexpected damage or injury.
Warning
: Do not use this product if the power cables are damaged.
CAUTION:
Make sure that the power cord of the unit is disconnected from the
mains before performing the following operation to avoid shock
hazard!
3.1 Cleaning
We recommend, if possible, frequent cleaning of the device, which will ensure its long
lifespan and bright light output. While performing the cleaning,
please always make sure
that the power cord is disconnected from the mains
and use a moist, lint-free cloth.
Avoid using any alcohol or solvents, as they are harmful to the fixture.
3.2 Replace the fuse
Fuse Holder of the device holds a 0.5A/250V or 1A/125V fuse and is designed to protect
the electronics in the event of severer power fluctuations. Never defeat this fuse. In case
the fuse is failure, be sure to replace with an exact match one. To perform a replacement
,
please use a crosshead screwdriver to remove the fuse holder from its housing. Gently
pull out the bad fuse and discard of it properly and replace with a rated one. In the end,
reassemble it in reverse order.
PART III Maintenance and Cleaning (continued)
