AN-X4-ABRIO-SCAN Page
71
AN-X Firmware Upload
Use
Administration/AN-X Firmware Upload
to upload a firmware (*.qtf) file to the AN-X. Uploading
a qtf file automatically selects the file. You must REBOOT the AN-X to run the firmware you
uploaded.
WARNING!
Updating the AN-X firmware disrupts RIO and Ethernet communication.
Make sure your process is in a safe state.
AN-X Firmware Remove
Use
Administration/AN-X Firmware Remove
to remove a firmware (*.qtf) file from the AN-X.
You cannot remove the file that is currently running on the AN-X.
AN-X Diagnostic Capture
Use
Administration/AN-X Diagnostic Capture
to create a compressed zip file that contains the current
AN-X configuration and logs, for use by technical support.
Click the CREATE CAPTURE button to create the file. There is a slight delay while AN-X builds
the file.
Once AN-X has built the file it displays a second web page. Click the
Download Capture File
button
to save the file to your computer.
AN-X Kernel Page
Use
Administration.AN-X Kernel Page
to display the version of the Linux kernel on the AN-X.
This page is also displayed if the AN-X fails to load firmware at startup. If that happens, use
Administration/Firmware Select
to select a firmware file, then REBOOT the AN-X.
