AN-X4-ABRIO-SCAN Page
35
Block Transfer Error Codes
Error Code
Description
0
OK
1
BTR/BTW request ignored by block transfer module
2
Block Transfer state mismatch
3-6
Reserved, not currently used
7
Block transfer disabled
Required Connections
The configuration tool shows the ControlLogix connections to which data has been mapped, at the
root of the network tree.
For each required connection, you must create a Generic module in the ControlLogix configuration
with that slot number. See page 39.
Required connections need not be contiguous.
In the example shown, data has been mapped to blocks 0 and 1 and so connections 0 and 1 must exist
in the ControlLogix in order for the AN-X4-ABRIO-SCAN to scan I/O.
Uploading and Downloading Configurations
To download a configuration to the AN-X4-ABRIO-SCAN, select
Communication/Download
Configuration
or use the
Download Configuration to Module
button on the toolbar.
To upload a configuration from the AN-X4-ABRIO-SCAN, select
Communication/Upload
Configuration
or use the
Upload Configuration from Module
button on the toolbar.