QTS AN-X4-ABRIO-SCAN, User Manual, Page: 15 / 80

AN-X4-ABRIO-SCAN Page
15
Quick Start
Step Operation See page
1 Install the AN-X Windows software 20
2 Power up the AN-X, connect it to Ethernet and assign it an IP
address 13
3 Connect AN-X to the Remote I/O network 13
4 Use the AN-X Windows utility to autoconfigure the remote I/O
network and ControlLogix configuration 20
5 Add and configure any required block transfer modules 25
6 Map the remote I/O data 27
7 Configure the AN-X in RSLogix 5000 39
8 Scan I/O, read inputs and write outputs 43
9 Create aliases for RSLogix 5000 36
10 Import the aliases into RSLogix 5000 42
11 Use the aliases to access data 41