QTek S200, User Manual, Page: 92 / 180

92 Getting Connected
To add your device as an infrared modem to your notebook
1. After you tap Activate on the Modem Link screen of your device, the Found New
Hardware dialog box will then appear on Windows on your notebook and will show that
your device has been detected as an infrared modem. In this dialog box, make sure
that
Install the software automatically (Recommended)
is selected then click
Next
.
2.
Wait for Windows to finish installing the infrared modem, then click Finish .
3. You can now connect your computer to the Internet. Follow the steps in “To dial up and
connect to the Internet.”
To add your device as a USB modem to your computer
1. After you tap Activate on the Modem Link screen of your device, your computer will
automatically detect that your device has been connected. The Found New Hardware
dialog box will then appear on your computer.
2. In the Found New Hardware dialog box, select Install from a list or specific location
(Advanced) and click Next .
3. Select Search for the best drivers in these locations .
4. Insert the Getting Started Disc into your CD drive. Select the Include this location in
the search check box. Click Browse and choose the CD drive and root folder where
the modem driver is located, then click Next .