QTek S200, User Manual, Page: 135 / 180

Experiencing Multimedia 135
• Flicker adjustment . When taking indoor shots, flicker on the camera screen may
be caused by inconsistencies between the vertical scan rate of the camera display
and the flicker frequency of fluorescent lighting. To reduce flicker, you can change
the flicker adjustment setting to Auto or to the proper frequency (50Hz or 60Hz) of
the country where your device is being used.
• Save to . Select where you want to save your files. You can either save the files to
the main memory or to a storage card.
• Image tab. This tab provides image-related settings for captured files.
• Prefix type and Prefix string . By default, the file name of each new captured
image file is set to “IMAGE” followed by a sequential number, for example: IMAGE_
00001.jpg. To change this prefix, select String in the Prefix type list, then enter the
desired characters in the Prefix string box.
• Counter index
. By default, the newly captured image files are named with a prefix
and some sequential numbers, such as 00000, 00001, 00002, and so on. To reset
the numbering to “00001” for your captured image files, tap Reset counter .
• JPEG quality . Select the JPEG image quality level for all captured still images. You
can choose from SuperFine , Fine , Normal , and Basic .
• Self-Timer
. Select the Self-Timer option for capturing images:
Off
,
5 seconds
,
or 10 seconds . Selecting 5 seconds or 10 seconds delays the capturing by the
specified time after you press CAMERA or ENTER.
• Video
tab. The options in this tab are for configuring the settings of the captured video
files.
• Prefix type and Prefix string . By default, the file name of each new, captured
video file is set to “VIDEO” followed by a sequential number, for example: VIDEO_
00001.avi. To change this prefix, select String in the Prefix type list and enter the
desired characters in the Prefix string box.
• Counter index . By default, the newly captured video files are named with a prefix
and some sequential numbers, such as 00000, 00001, 00002, and so on. To reset
the numbering to “00001” for your captured video files, tap Reset counter .
• Recording with audio . Select this check box to record audio with the captured
video clips. This check box is selected by default. If you clear this check box and
then capture a video clip, it would have no audio.