QTek S200, User Manual, Page: 88 / 180

88 Getting Connected
3. After Wi-Fi has been turned on, your device then scans for available wireless networks
in your area. The network names of the detected wireless networks will be displayed on
a pop-up message window. Tap the desired wireless LAN, then tap OK .
4.
On the next pop-up message window, tap The Internet if the wireless LAN connects
your device to the Internet. Otherwise, tap Work if the wireless LAN connects your
device to a private network.
5.
If the wireless LAN is secured by a network key, enter this key, then tap Connect .
Next time you use your device to detect wireless networks, you won’t see the pop-up
message windows again, and you will not be prompted to enter the network key of a
wireless LAN that you have previously connected to (unless you perform a hard reset
which will erase custom settings on your device).