QSurround
TM
is a trademark of QSound Labs, Inc.
WARNING
To prevent fire or shock hazard, do not expose the unit to rain or moisture
This symbol is intended to alert the user of the presence of uninsulated “dangerous voltage” within the product’s
enclosure that may be of sufficient magnitude to constitute a risk of electric shock to persons.
This symbol is intended to alert the user of the presence of important operating and maintenance (servicing)
instructions in the literature accompanying the appliance.
IMPORTANT
This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of
FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential
installation. This equipment generates, uses, and can radiate radio frequency energy, and, if not installed and used in
accordance with instructions, may cause harmful interference to radio communications. However, this is no guarantee
that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or
television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to
correct the interference by one or more of the following measures:
•
Increase separation between the equipment and amplifier.
•
Connect the equipment into an outlet on a circuit different from that to which the amplifier is connected.
•
Consult the dealer or and experienced radio / television technician for help.
CAUTION
You are cautioned that any change or modification not expressly approved in this manual could void your authority to
operate this equipment.
PRECAUTIONS
On Safety
•
Should any solid object or liquid fall into the cabinet, unplug the amplifier and have it checked by qualified
personnel before operating it any further.
On Power Source
•
Before operating the amplifier, check that the operating voltage is identical with your local power supply.
•
The amplifier is not disconnected from the AC power source (MAINS) as long as it is connected to the wall
outlet, even if the amplifier is turned off.
•
One blade on the plug is wider than the other for the purpose of safety and will fit into the wall outlet only one
way. If you are unable to insert the plug fully into the outlet, contact your dealer.
•
Should the AC power cord need to be changed, have it done at a qualified service shop only.
On Placement
•
Amplifier must be mounted so that the heat sinks are in a vertical position.
•
Do not place the amplifier near heat sources, or in a place subject to direct sunlight, excessive dust or
mechanical shock.
