QSurround
TM
is a trademark of QSound Labs, Inc.
If you feel the volume of the surround or subwoofer speakers are inadequate, perform the following:
Located on the top panel of the Amplifier are volume adjustments for the surround and subwoofer
speakers. Use a flat head screwdriver to adjust until the appropriate sound level is determined. Note:
optimal position varies based on proximity of listening area relative to speakers.
As all audio / video components have different audio output signals, a volume adjustment may be required:
The Amplifier may have a volume adjustment for the television on the top panel or may be supplied
with a separate in-line volume control (part # MHSLLA-01). The in-line volume control connects to
the television input of the Amplifier. To set the television volume adjustment, perform the following:
With the television connected to the Amplifier, set television volume to the middle of the volume
bar. Using a flat head screwdriver, turn the volume adjustment on the Amplifier or in-line volume
control until the desired listening volume is obtained.
Operating Situations / Tips
Television and Stereo on at same time
:
Television has priority and will play through speakers in main listening area.
Once television is turned off, there is a 15 second delay before stereo plays in the main listening area.
In multi-room system, stereo will play in additional zones simultaneous to television in the main
listening area.
Mute Television
:
Allows you to listen to stereo source while watching television. If television is muted, stereo will
play after a 15 second delay.
Volume Control
:
Main listening area volume is controlled through audio / video component connected to the
Amplifier.
