QSurround
TM
is a trademark of QSound Labs, Inc.
Installation
Amplifier
The heat sinks on the Amplifier must be mounted in a vertical position to allow for proper
ventilation
.
Zone 2 Amplifier
Speakers
6 ½” Ceiling
1.
Cut out hole size 7 ¾” Diameter.
A perforated template is part of the speaker packaging
2.
Connect speaker wire to speaker.
3.
Place speaker into hole cut out.
4.
Screw down until mounting clamps tighten to wall board.
5.
Place adhesive in speaker bevel.
6.
Fasten grill.
4”X6” Center / Surround , 6”X9” Woofer , and 6 ½” In-Wall
1.
Cut out hole size (HW): 5 3/8” X 7 3/8”
(4”X 6” speaker)
10 9/16” X 7 5/8” (6”X 9” speaker)
10 7/8” X 7 3/8” (6 ½” speaker)
A perforated template is part of the speaker packaging
2.
Connect speaker wire to speaker.
3.
Place speaker into hole cut out.
4.
Screw down until mounting bracket tightens to wall board.
5.
Place adhesive in speaker bevel
6.
Fasten grill.
Cube
1.
Connect speaker wire.
2.
Screw mounting bracket to wall board.
