Q'STRAINT QLK-150, Use And Care Manual

Page: 18 / 20

18
PREVENTATIVE MAINTENANCE CHECKLIST
The following items should be inspected and serviced by an experienced and trained technician during the scheduled maintenance of
the QLK-150 Wheelchair Docking System.
❏ ❏
Clean all debris from under the base unit.
❏ ❏
Clean the latch mechanism with WD-40 then lubricate with light oil such as 3-in-1.
❏ ❏
Inspect all cables for fraying. Replace any that have frayed.
❏ ❏
Verify that all manual release systems are functioning properly.
❏ ❏
Verify that the release solenoid is working properly.
❏ ❏
Inspect micro switch for corrosion or damage. Replace any that have deformed or show corrosion.
❏ ❏
Verify that all lights are working on the Dash Control.
❏ ❏
Verify that the warning Buzzer activates properly.
❏ ❏
Verify that the Docking Bolt is not damaged or corroded. Replace if needed.
❏ ❏
Verify that all mounting bolts for the base unit and wheelchair interface bracket are tight.
❏ ❏
Inspect all wiring harnesses for chaffing and replace if needed.
❏ ❏
Verify that all seatbelt systems are not worn or frayed. Replace as needed.
❏ ❏
Check Docking Bolt adjustment where it enters guide channel and correct if necessary.
3 YEAR WARRANTY - ALL SYSTEMS, PRODUCTS & ACCESSORIES
WARRANTY REGISTRATION
In order to take full advantage of Q’Straint’s warranty, register your product online at:
www.qstraint.com/registration
PLEASE DO NOT MAIL IN THIS REGISTRATION
Before going online, have your vehicle’s registration handy as well as the equipment’s:
Serial # _____________________________________________ Part #________________________________________________________________
Q’STRAINT’S LIMITED WARRANTY: Q’Straint
®
warrants this product conformance to our manufacturing specifications and to be free from defects in
materials and workmanship. Q’Straint
®
or its authorized dealer will (at its sole discretion), repair or replace the defective component(s) free of charge. This
warranty does not cover the cost of assembly or disassembly, transportation, labor, or any other incidental costs involved in the removal of a defective part
or the installation of the replacement part.
Q’Straint
®
or its authorized dealers reserves the right to inspect the product to verify the claimed defect has not been caused by non-Q’Straint
®
approved
maintenance or by foreign particles or substances. This Warranty does not apply to defects that result from accident, misuse or abuse, intentional damage,
fire, flood, alteration or modification of the product, negligence, exposure, or use of the product in a manner inconsistent with its intended use.