BT-Q1200 Super 99
®
GPS Travel Recorder
24
4. < CONFIGURATION > \ <Other>
Setup the recording method for the flash memory of BT-Q1200 under <Other>.
1.1
Click <CONFIGURATION> tab \ <Other> button.
1.2
The default setting is <Stop>. When the flash memory is full, BT-Q1200 will
stop logging data. If you want to record new data, you must erase all data in
the flash memory.
1.3
Click <Overwrite> to change to Overwrite method. Then system will pop up a
message box to notify you “Overwrite is set”. When the flash memory is full,
BT-Q1200 will overwrite the memory data. So the previous data will be
updated as newer.