BT-Q1200 Super 99
®
GPS Travel Recorder
5
5.
Hardware Introduction
5-1. Appearance
1. Power jack (mini USB type)
2. Power Button (ON/OFF/Enable LOG mode/Disable LOG mode)
3. Battery status LED (Red/Green)
4. Bluetooth status LED (Blue)
5. GPS status LED (Orange)
6. LOG status LED (Blue)
7. Internal antenna
8. Solar panel (Auxiliary power source)
5-2. Hardware Function
Hardware Function
Description
Power Jack
Take the power cable and connect it to the power jack
(mini USB type) for charging only
Power Button (On)
Press power button and hold for 3 sec to power
BT-Q1200 on.
Power Button (Off)
Press power button and hold for 3 sec to power
BT-Q1200 off
Power Button
(Enable Log mode)
After power BT-Q1200 on, press power button once to
enable log mode. Then BT-Q1200 would start logging
with the blinking LOG status LED (blue).
Power Button
(Disable Log mode)
Press power button again to disable log mode. The LOG
status LED (blue) would be off, and stop logging.