5
Pro Tools 12.5
macOS, Windows
NOTE: Pro Tools will need to create a Pro Tools Aggregate I/O Device in the
Audio MIDI Setup
window of a setup app. This procedure will be covered later.
1. Open Pro Tools 12.5. You will be prompted to either create a new project or
open an existing one (Figure 15). Choose your approach.
2. To set up the Pro Tools Aggregate I/O, go to
Setup > Hardware
. In the
Hardware Setup
window (Figure 16), click
Launch Setup App
.
3. The
Setup MIDI Audio Devices
window will open (Figure 17).
Select Pro
Tools Aggregate I/O
and select the
QSC TM30 Pro
. Set the sample rate to
match the mixer’s sample rate (the TouchMix sample rate is configured in its
Rec/Play
screen).
4. To set up I/O routing for the TouchMix-30 Pro, go in Pro Tools to
Setup > I/O
Setup
.
5. The
I/O Setup
window includes input and output assignment matrices
(Figure 18). Assign them as needed. Click
OK
.
6. To assign TouchMix-30 Pro inputs to tracks, go to
Track > New…
and click
Create
.
7. The
New Tracks
window will open (Figure 19). In
Create
, enter the number
of tracks to add (for example, 32). Click
Create
; 32 mono audio tracks have
been added to Pro Tools.
— Figure 15 —–
— Figure 16 —–
— Figure 17 —–
— Figure 18 —–
— Figure 19 —–
