QRS QRS-101, Operating Instructions Manual

Page: 17 / 40

GB
You may select the stated parameters via control keys on the keyboard, arbitrarily. The therapy will be started
after setting these parameters by pressing the
Start
Stop
-key.
Before starting the therapy you may typically see the following display:
Here, the current time is shown on the display’s left side, the right side will alternately display the selected
parameters for the therapy program, the therapy intensity or the therapy duration (e.g. therapy intensity, as
depicted above).
After starting the therapy the display will change to the following typical view:
On the display’s left side the current therapy program and selected therapy intensity are shown, alternately,
the right side displays the remaining time until the end of therapy. The time (of day) and the pre-defi ned
therapy duration are not displayed during the therapy.
16:41 INTENSIVE
INTENSIVE 06:21
!
NOTES
• The home therapy may not be performed if a chip card has been inserted into the card
reader. Please remove the chip card, fi rst.
• The therapy intensity „intensive“ is not available for the therapy program „relax“. The
intensity „medium“ will always be chosen, whenever the intensity „intensive” is being
selected.
3.2.1 FINE-TUNING OF INTENSITY AND THERAPY DURATION
When necessary the intensity and duration of the home-therapy can be fi ne tuned.
The therapy duration can be adjusted starting from any time key (8 min, 16 min, 24 min). Press the key for
2 sec. until the time in the display fl ashes and shows e.g. „16 MIN.“. By pressing the key the time decreases
in 1 minute steps and by pressing the key the time increases in 1 minute steps.
The intensity can be adjusted starting from any of the intensity keys (sensitive, medium, intensive). Press the
key for 2 sec. until the intensity in the display changes and shows e.g. „INT=05“. By pressing the key the
intensity decreases and by pressing the key the intensity increases. The intensity range starts from „SE“
(=sensitive) up to 1 -10. The therapy program „relax“ allows only values up to 5.
After having reached the desired setting press the confi rmation key („OK“) and continue with normal
operation.
19