QPR 6690 10 Gallon Melter Applicator
ASSEMBLY INSTRUCTIONS
5 of 18
7322 Bonnyshire Drive
Chattanooga, TN 37416
September 2015
Step 2:
Assemble rear wheels to the axle
*Remove the cotter-‐pin and washer.
*Slide wheel on to the axle.
*Place washer on the outside of the wheel between the wheel
and cotter-‐pin slot.
*Re-‐insert the cotter pin and bend to lock in position.
*Spin wheel several times to set it and confirm ease of turning on the axle.
Note:
If the wheel does not turn freely enough, remove and use a wire brush
or torch to remove excess paint from the axle.
Remove Cotter Pin and Washer
Place washer between
the cotter-‐pin and wheel
