QPR 6690 10 Gallon Melter Applicator
ASSEMBLY INSTRUCTIONS
13 of 18
7322 Bonnyshire Drive
Chattanooga, TN 37416
September 2015
Step 5
Attach handle to tank body
*Using the two bolts on each side of the tank body, attach the handle.
*Tip: Screw in bolt nearest the edge on each side, then screw in the
bolts in the middle of the body. This makes it easier to align the handle
to the holes.
* Attach the handle with all four bolts hand tight only before tightening with
a wrench to final position. Do not over tighten the bolts.
Bolts In Position for Handle
Attach Handle to each side of the tank
