8
B
:
SLIDE COVER -
Place the
SLIDE COVER
on top of the
FOOD BOWL
so the finger tab is
in the opening of the
LID
C
:
FINGER TAB
– For closing the
SLIDE COVER
which will lock into the
LID
D
:
Food TRAY
- The
FOOD TRAY
will seat into the
HUB
in the
FEEDER BASE
in only one
position. Be sure the
FOOD TRAY
seats properly onto the
HUB
E
:
HUB
- The
FOOD TRAY
slides into this and is what rotates the
FOOD TRAY
F
:
LOCK
- is used to lock the lid to the
FEEDER BASE
. Push down in the middle of each
LOCK and pull up using your fingertips.
G
:
FEEDER BASE
- Place the
FEEDER BASE
on a flat level surface at a height that is easy
for you to see what you are doing
Assemble
1.
Remove the
LID
. (
DO NOT
pull the
LID
off from only one side as it can damage
the lock pins)
2.
Remove the
BOWL COVER
3.
Take the
SLIDE COVER
out
4.
Take the
FOOD TRAY
out
Disassembly
1.
Put the
FOOD TRAY
back
2.
Put the
SLIDE COVER
back
3.
Put the
BOWL COVER
back
4.
Put the
LID
back
Cleaning and Care
When the food tray starts getting dirty, you can
DISASSEMBLE
the
LID, BOWL
COVER, SLIDE
COVER
and
FOOD TRAY
from the
FEEDER BASE
.
Clean the
LID
,
BOWL COVER
,
SLIDE COVER
and
FOOD TRAY
in warm soapy water.
Do not wash the LID, BOWL COVER, SLIDE COVER and FOOD TRAY in
dishwasher, as parts may become permanently damaged!
USE a soft damp cloth to clean the
FEEDER BASE
.
(DO NOT wash FEEDER BASE
with RUNNING WATER)
