Page
21
of
29
Control functions and Usage of Your QOD Trolley
Usage of the Trolley with the Controls
Complete Handle and Controls
Red light indicator (Power) - A flashing red light on
the handle indicates that the battery is too low to
drive the trolley. LCD display shows variable speed
between values 1 to 5.
USB Connection
On the right hand side behind the T-handle
locates a USB connection for the convenience of
maintaining power on the course for your GPS
or your sub devises. Power will output in the
duration of the battery being connected to the
trolley if any device is connected. Charging will
be slower because the power output is similar to
a computer output.
ON/OFF Button
Needs to be held down for a few seconds (or
until light turns on) before trolley will be turned
on or off.
Variable Speed Control
(Mutually Independent)
Variable speed adjustments, up to 5 speeds. Only
one speed control can be used at a time as the
potentiometer and variable speed button are
mutually independent to each other. When the
Speed Button
Potentiometer
trolley starts the speed will gradually increase due
to the soft start
Time Forward Advance
Time forward advance allows the trolley to run for
a set amount of time with a countdown feature for
your reference. It operates at a preset speed which
not adjustable.
•
10 seconds - Runs for 10 seconds and stop
•
20 seconds - Runs for 20 seconds and stop
•
30 seconds - Runs for 30 seconds and stop
STOP/START Button
Soft switch to stop the trolley and then resume the
trolley. This button maintains the variable speed
control previously set before stopping
QOD Golf International. www.qodgolf.com
Warning: Product Patent Protected, Design Protected, Copyright Protected. All rights Reserved
