QNO 2WAN 3LAN User Manual Download Page 47

Page: 47 / 106

2WAN 3LAN VPN QoS Security Router

has been set up, the Internet IP server or PC which is mapped with a LAN port will be exposed

on the Internet. To prevent Internet users from actively connecting with the One-on-One NAT

server or PC, please set up a proper denial rule for access, as described Firewall.

4.6 DDNS- Dynamic Domain Name Service

DDNS supports the dynamic web address transfer for QnoDDNS.org.cn, 3322.org,

DynDNS.org and DtDNS.com. This is for VPN connections to a website that is built with dynamic

IP addresses, and for dynamic IP remote control. For example, the actual IP address of an ADSL

PPPoE time-based system or the actual IP of a cable modem will be changed from time to time. To

overcome this problem for users who want to build services such as a website, it offers the

function of dynamic web address transfer. This service can be applied from www.qno.cn/ddns,

www.3322.org, www.dyndns.org, or www.dtdns.com, and these are free.

Also, in order to solve the issue that DDNS server is not stable, the device can update the

dynamic IP address with different services at the same time.

Summary of Contents for 2WAN 3LAN











































































































Search results

Summary of Contents for 2WAN 3LAN

Reviews:

Related manuals for 2WAN 3LAN

Brands by name

Popular brands

QNO 2WAN 3LAN, User Manual

Search results

Summary of Contents for 2WAN 3LAN

Reviews:

Related manuals for 2WAN 3LAN

Brands by name

Popular brands