QNO 2WAN 3LAN User Manual Download Page 56

Page: 56 / 106

2WAN 3LAN VPN QoS Security Router

V. Tool Configuration

This chapter introduces the management tool for controlling the device and testing network

connection.

5.1 Diagnostic

The device provides a simple online network diagnostic tool to help users troubleshoot

network-related problems. This tool includes

DNS Name Lookup

(Domain Name Inquiry Test)

and

Ping (Packet Delivery/Reception Test)

DNS Name Lookup

On this test screen, please enter the host name of the network users want to test. For

example, users may enter www.abc.com and press "Go" to start the test. The result will be
displayed on this page.

This item informs users of the status quo of the outbound session and allows the user to

know the existence of computers online.

On this test screen, please enter the host IP that users want to test such as

192.168.5.20. Press "Go" to start the test. The result will be displayed on this screen.

Summary of Contents for 2WAN 3LAN











































































































Search results

Summary of Contents for 2WAN 3LAN

Reviews:

Related manuals for 2WAN 3LAN

Brands by name

Popular brands

QNO 2WAN 3LAN, User Manual

Search results

Summary of Contents for 2WAN 3LAN

Reviews:

Related manuals for 2WAN 3LAN

Brands by name

Popular brands