QNO 2WAN 3LAN User Manual Download Page 12 | Manualshive

Page: 12 / 106

QNO 2WAN 3LAN User Manual Download Page 12

2WAN 3LAN VPN QoS Security Router

7

The current port setting status information will be shown in the Port Status Table. Examples:

Network connection, port (on or off), priority (high or normal), connection speed (10Mbps or

100Mbps), duplex status (half-duplex or full duplex), and auto negotiation (Enabled or Disabled).

3.2.3 General Setting Status

LAN IP:

Indicates the LAN port current IP configuration. The default IP is 192.168.1.1. Click the

hyperlink to enter and manage the configuration.

WAN 1 IP:

Indicates the WAN1 current IP configuration. Click the hyperlink to enter and manage the

configuration. When “Obtain an IP automatically” is selected, two buttons (Release and
Renew) will appear on the right of the page. Click “Release” to release the IP that is issued by
the ISP, and click “Renew” to refresh the IP that is issued by the ISP. If a WAN connection,
such as PPPoE or PPTP, is selected, “Disconnect” and “Connect” will appear on the page.

WAN 2/DMZ IP:

Indicates the WAN2 or DMZ current IP configuration. Click the hyperlink to enter and

manage the configuration.

Default Gateway:

Indicates the current Gateway IP configuration. Click the hyperlink to enter and manage

the configuration.

DNS:

Indicates the current DNS IP configuration. Click the hyperlink to enter and manage the

«
...
10
11
12
13
14
...
»

Summary of Contents for 2WAN 3LAN











































































































Reviews:

No comments