QNAP TS-h 83XU-RP Series User Manual Download Page 37

Page: 37 / 49

Method

Description

Requirements

Qfinder Pro
installation
(Recommended)

If the NAS is connected to your local area
network, you can do the following:

• Locate the NAS using Qfinder Pro.

• Complete the steps in the Smart

Installation Guide wizard.

For details, see

Installing QuTS hero

Using Qfinder Pro

• Computer

• Network cable

• Qfinder Pro installer

Cloud installation

If the NAS is connected to the internet,
you can do the following:

• Scan the QR code on the NAS.

• Specify the Cloud Key.

• Log into your myQNAPcloud account.

• Use myQNAPcloud Link to remotely

access your NAS.

• Complete the steps in the Smart

Installation Guide wizard.

For details, see

Installing QuTS hero

Using the Cloud Key

• Computer or mobile device

• myQNAPcloud account

• Cloud Key

Installing QuTS hero Using Qfinder Pro

Warning

Installing QuTS hero deletes all data on the drives. Back up your data before proceeding.

Note

You can revert to QTS operating system anytime. For details, see QuTS hero user guide.

Power on the device.

Connect the device to your local area network.

Run Qfinder Pro on a computer that is connected to the same local area network.

Note

To download Qfinder Pro, go to

https://www.qnap.com/utilities

Locate the NAS in the list and then double-click the name or IP address.
The

Smart Installation Guide

opens in the default web browser.

Click

Start Smart Installation Guide

The

Install Firmware

window appears.

Install firmware using any of the following methods:

TS-hx83XU-RP User Guide

Installation and Configuration

Summary of Contents for TS-h 83XU-RP Series


















































Search results

Summary of Contents for TS-h 83XU-RP Series

Reviews:

Related manuals for TS-h 83XU-RP Series

Brands by name

Popular brands

QNAP TS-h 83XU-RP Series, User Manual

Search results

Summary of Contents for TS-h 83XU-RP Series

Reviews:

Related manuals for TS-h 83XU-RP Series

Brands by name

Popular brands