2. Connect the expansion units to the device using the following topology.
QNAP recommends always using dual-path configuration to prevent storage downtime due to
expansion unit failure or cable disconnection. Single-path configuration should be used only in a
situation where it is not possible to use dual-path configuration.
3. Power on the expansion units.
4. Verify that the expansion units are recognized by the device.
a. Log on to QuTS hero as administrator.
b. Go to Main Menu > Storage & Snapshots > Overview > System .
c. Verify that the expansion units are listed.
Connecting SATA JBOD expansion units
The TS-hx77AXU-RP series supports connecting one SATA JBOD expansion unit. For required accessories
details, see
1. Power off the NAS.
2. Install a host bus adapter on the PCIe slot.
Installing PCIe expansion cards
.
TS-hx77AXU-RP User Guide
Installation and Configuration
36
