manualshive.com logo in svg

QNAP TS-h 77AXU-RP Series, User Manual, Page: 27 / 71

Share
Download
QNAP TS-h 77AXU-RP Series User Manual Download Page 27

7. Attach the case cover. 

For details, see 

Attaching the case cover

.

8. Connect all cables and external attachments.

9. Connect the power cords to the electrical outlet.

10. Power on the device.

11. Verify that the module is recognized by the device.

a. Log on to QuTS hero as administrator.

b. Go to Control Panel > System > System Status > Hardware Information .

c. Check the value for Total memory.

Installing PCIe expansion cards

The NAS supports selected expansion cards, some of which require QNAP PCIe brackets. QNAP-branded

expansion cards purchased from the company website are shipped with the brackets necessary to fit all

QNAP NAS models.

Warning

• Only qualified personnel should perform the following steps. Failure to follow

instructions can result in serious injury or death.

• Observe electrostatic discharge (ESD) procedures to avoid damage to components.

•

Moving fan blades: Keep your hands and other body parts away from moving fan

blades.

TS-hx77AXU-RP User Guide

Installation and Configuration   

26

Summary of Contents for TS-h 77AXU-RP Series








































































Reviews:

No comments