QNAP TS 53D Series User Manual Download Page 6

Page: 6 / 60

Component

TS-253D

TS-453D

TS-653D

Flash
memory

4 GB (dual-boot OS protection)

Storage
Drive bays

2 x 3.5-inch SATA 6 Gbps

4 x 3.5-inch SATA 6 Gbps

6 x 3.5-inch SATA 6 Gbps

Note

The SATA 6 Gbps is also backward compatible with the SATA 3 Gbps.

Drive
compatibility

3.5-inch bays:

• 3.5-inch SATA hard disk drives

• 2.5-inch SATA hard disk drives

• 2.5-inch SATA solid-state drives

SSD cache
acceleration
support

3.5-inch drive bays: 1 to 2

3.5-inch drive bays: 1 to 4

3.5-inch drive bays: 1 to 6

Hot-
swapping

Supported

Network
2.5 Gigabit
Ethernet
ports

2 x 2.5 GbE RJ45

External I/O Ports & Expansion Slots
PCIe slots

1 x PCle Gen 2.0 x4

1 x PCle Gen 2.0 x2

Tip

For the list of compatible expansion cards, go to

https://www.qnap.com/

compatibility

USB ports

Front:

• 1 x USB 3.2 Type-A

Note

This USB port supports One Touch Copy.

Rear:

• 1 x USB 3.2 Type-A

• 3 x USB 2.0 Type-A

HDMI ports

1 x HDMI 2.0 (up to 4096 x 2160 at 60 Hz)

Interface
IR sensor

Note

The QNAP RM-IR004 remote control is an optional separate purchase.

Buttons

• Power

• Reset

• USB One Touch Copy

TS-x53D User Guide

Product Overview

Summary of Contents for TS 53D Series





























































Search results

Summary of Contents for TS 53D Series

Reviews:

Related manuals for TS 53D Series

Brands by name

Popular brands

QNAP TS 53D Series, User Manual

Search results

Summary of Contents for TS 53D Series

Reviews:

Related manuals for TS 53D Series

Brands by name

Popular brands