3.
Press
Enter
repeatedly until the panel displays
Main Menu 7. Password
.
4.
Press and hold
Enter
.
The
Change Password
screen appears.
5.
Select
Yes
by pressing and holding
Enter
.
The
New Password
screen appears.
6.
Press
Select
and
Enter
to set the new password.
• Specify a password with 1 to 8 characters. The password can only contain numbers (0 to 9).
• To remove a password, leave the password field blank.
Button
Usage
Enter
Move to the next item in the
New Password
screen.
Select
Change a number in the
New Password
and
Verify Password
screens.
7.
Press
Enter
.
The NAS saves the password.
OLED Error Messages
System Message
Description
Sys. Fan Failed
The system fan failed.
Sys. Overheat
The system overheated.
HDD Overheat
The drive overheated.
CPU Overheat
The CPU overheated.
Network Lost
LAN 1 and LAN 2 are disconnected in failover or are in load-balancing
mode.
LAN1 Lost
LAN 1 is disconnected.
LAN2 Lost
LAN 2 is disconnected.
HDD Failure
The drive failed.
Vol1 Full
The volume is full.
HDD Ejected
The drive was ejected.
Vol1 Degraded
The volume is in degraded mode.
Vol1 Unmounted
The volume is unmounted.
Vol1 Nonactivate
The volume is not activated.
LEDs
LEDs indicate system status and related information when the NAS is powered on. The following LED
information applies only when the drive is correctly installed and when the NAS is connected to the network.
For details on the location of the LEDs, see
.
TS-453BT3 User Guide
Basic Operations
49
