QNAP TS-453BT3 User Manual Download Page 11

Page: 11 / 65

Category

Item

Hardware and peripherals

• Storage drives

For details on compatible drives, go to

https://www.qnap.com/

compatibility/

• Network cable

Tools

• Phillips #1 or #2 screwdriver

• Anti-static wrist strap

Setting Up the NAS

Place your NAS device in an environment that meets the requirements.
For details, see

Installation Requirements

Verify that the intake vents on the bottom of the case are unobstructed.

Remove the protective films from the OLED screen and the front cover.

Install the drives.
For details, see the following topics:

•

Installing 3.5-inch Hard Drives on 3.5-inch Trays

•

Installing 2.5-inch Hard Drives or Solid State Drives on 3.5-inch Trays

•

Installing M.2 Solid State Drives

Connect the power cord and all applicable cables.

Power on the NAS.

Install QTS.
For details, see

QTS Installation

Log on to QTS.

TS-453BT3 User Guide

Product Overview

Summary of Contents for TS-453BT3


































































Search results

Summary of Contents for TS-453BT3

Reviews:

Related manuals for TS-453BT3

Brands by name

Popular brands

QNAP TS-453BT3, User Manual

Search results

Summary of Contents for TS-453BT3

Reviews:

Related manuals for TS-453BT3

Brands by name

Popular brands