4. Click Save.
QSS saves the setting.
Setting Bridge Priority
You can configure the RSTP bridge priority of the switch in the RSTP configuration field.
1. Log in to QSS.
2. Go to Configuration > RSTP > RSTP Configuration .
3. Enable RSTP.
Note
For details, see
4. Select the RSTP bridge priority from the drop-down list.
Note
The default priority is 32768 and it is recommended that you set the bridge priority to zero for
root bridge priority.
5. Click Save.
QSS updates the RSTP bridge priority.
Configuring the LLDP Settings
The Link Layer Discovery Protocol (LLDP) uses periodic broadcasts to advertise device information over the
network and discover neighboring devices. This protocol operates by establishing a distributed database
and gathering information from neighboring ports connected by a network link.
The LLDP page displays information about detected devices and allows you to enable or disable LLDP.
1. Log in to QSS.
2. Go to Configuration > LLDP .
3. Change the LLDP control status.
Toggle Setting
User Action
Click to enable the LLDP function.
Click to disable the LLDP function.
4. Click Save.
QSS saves the setting.
Adding a Static MAC Address
The MAC address table tracks MAC addresses and forwards associated unicast traffic through specific ports.
1. Log in to QSS.
2. Go to Configuration > LLDP > MAC Address Table .
QSW-M2106 User Guide
QSS
19
