Install
to Single Wood Stud Wall
•
Installer must verify that the supporting surface will safely support the combined load of the equipment and all attached
hardware and components.
•
Tighten wood screws so that wall plate is firmly attached, but do not overtighten. Overtightening can damage the
screws, greatly reducing their holding power.
•
Make sure that mounting screws are anchored into the center of the stud. The use of an "edge to edge" stud finder is
highly recommended.
•
Hardware provided is for attachment of mount through standard thickness drywall or plaster into wood studs. Installers
are responsible for providing hardware for other types of mounting situations.
WARNING
Take out the AA
，
installation
requires two people
AA
6 of 8
You must secure the mount to two wall studs
with two lag bolts for each stud.
1)
wall studs in the vicinity of the mount.
2) Use a pencil to mark the exact center of each of the
wall studs.
Two people are recommended for this step; one
person to level the mount and another person to
mark the wall stud location.
1) Place the mount against the wall in the desired
viewing location.
2) Adjust the mount to align the mount slots in the
mount with the center of the wall studs.
3) Level the mount.
4) Use a pencil to mark the upper right mounting
location along the center of the wall stud.
A
G
AA
6mm(1/4”)
wood bit
STUD FINDER
(Optional)
