Qlogic SANbox 5000 Series, Installation Manual

Page: 79 / 130

4 – Installation
Installing a Switch
59096-04 A 4-9
A
4.2.3.2
Configuring the Workstation Serial Port
To configure the workstation serial port, do the following:
1. Connect a null modem F/F DB9 cable from a COM port on the management
workstation to the RS-232 serial port on the switch.
2. Configure the workstation serial port according to your platform:
„
For Windows:
a.
Open the HyperTerminal application. Choose the Start button,
select Programs, Accessories, HyperTerminal, and
HyperTerminal .
b. Enter a name for the switch connection and choose an icon in the
Connection Description window. Choose the
OK button.
c. Enter the following COM Port settings in the COM Properties
window and choose the
OK button.
‰
Bits per second: 9600
‰
Data Bits: 8
‰
Parity: None
‰
Stop Bits: 1
‰
Flow Control: None
„
For Linux:
a.
Set up minicom to use the serial port. Create or modify the
/etc/minirc.dfl file with the following content.
pr portdev/ttyS0
pu minit
pu mreset
pu mhangup
b. Verify that all users have permission to run minicom. Review the
/etc/minicom.users file and confirm that the line "ALL" exists or
that there are specific user entries.
„
For Solaris: Modify the /etc/remote file to include the following lines.
/dev/term/a refers to serial port a. Choose the "dv" setting to match the
workstation port to which you connected to the switch.
hardwire:\:dv=/dev/term/a:br#9600:el=^C^S^Q^U^D:ie=%$:oe=^D:
3. Proceed to “Connect the Switch to AC Power” on page 4-11 .