Qlogic SANbox 3810, User Manual

Page: 53 / 142

Managing Fabrics
Zoning
59269-00 A 2-29
A
5. To add switch ports or attached devices to the zone, choose one of the
following:
„
In the zone set tree, select the zone set. In the graphic window, select
the port to add to the zone. Open the Edit menu and select
Add
Members .
„
Select a port by port number, Fibre Channel address, or World Wide
Name in the Port/Device tree, and drag it into the zone.
„
Select a port by port number, Fibre Channel address, or World Wide
Name in the Port/Device tree. Right-click the zone and select
Add
Zone Members from the popup menu.
6. Click the Apply button to save changes to the zoning database.
Copying a Zone to a Zone Set
To copy an existing zone and its membership from one zone set to another, do the
following:
1. In the faceplate display, open the Zoning menu and select Edit Zoning to
open the Edit Zoning dialog.
2. In the zone set tree, select the zone to copy and click the Copy button.
3. Select the destination zone set, and click the Paste button.
4. Click the Apply button to display the Save Zoning & Error Check dialog.
5. Click the Perform Error Check button to have the application check for
zoning conflicts, such as empty zones, aliases, or zone sets.
6. Click the Save Zoning button to implement the changes.
7. Click the Close button to close the Error Check dialog.
Adding Zone Members
You can zone a port/device by switch domain ID and port number, device port
Fibre Channel address, or the device port WWN. Adding a port/device to a zone
affects every zone set in which that zone is a member. To add ports/devices to a
zone, do the following:
1. Open the Zoning menu, and select Edit Zoning to open the Edit Zoning
dialog.
2. Choose one of the following methods to add the port/device:
NOTE:
If you enter the name of a zone that already exists in the database, the
QuickTools web applet will ask if you would like to add that zone and its
membership to the zone set.