P
reli
mi
na
ry
Switch Faceplate Display (Port Display/TL Configuration)
SANbox-8/16 Switch Management
User’s Manual
59010-06 Rev. A
SANsurfer Switch Management
2-59
Targets Table
The switch will attempt to bridge between all initiators and all targets within the
same zone. The Translation Entries list for ports which contain targets will be
configured by the switch. No manual intervention is allowed.
Port Statistics
The application displays the Port Statistics and Performance for the selected
TL_Port. The application updates this information every five seconds or when
Refresh is pressed.
Initiator and Target Radio Buttons
The radio buttons are used to select the type of device(s) attached to the selected
port. A filled dot indicates which selection is chosen. Press Apply to activate and
save the setting.
Device List
The Device List in the bottom half of the window contains an entry for every
Public or Private device registered with the Name Server. Each device in the list
contains the following fields:
Device
The Device field indicates whether or not the device is one of the entries in the
translation entries list for the selected TL_Port. A Bridge icon in the Device field
indicates that it is one of the entries in the translation entry list. The lack of a
Bridge icon indicates that the device is not in the translation entries list.
##
This is the entry number of the device in the Device List.
Address
The Address field is the physical port address of the device.
ALPA
The proxy Arbitrated Loop Physical Address. This is the address that the Switch
uses to represent the “off-loop” device on this port.
Port WWN
This is the World-Wide Name of the device.
Vendor
The manufacturer of the device.
Status
Logged in, On Loop, or Bypass. Logged in means that the device is communi-
cating with the application. On Loop means that the device is recognized by the
application but communication could not be established. Bypass means that the
Summary of Contents for SANbox-16
