P
reli
mi
na
ry
Switch Faceplate Display
SANbox-8/16 Switch Management
2-44
SANsurfer Switch Management
59010-06 Rev. A
User’s Manual
•
Port Tuning — Allows you to change the characteristics of the individual port
to match the connected host bus adapter. Refer to
“Switch Faceplate Display
(View>Port Tuning (SANbox only))” on page 2-64
.
•
Port Modes — F, FL,SL, TL, F_Ext16, F_Ext24, F_Ext32, Testing, Offline.
Refer to
“Switch Faceplate Display (View>Port Modes)” on page 2-63
.
Special
The Special Menu has the following sub-menus.
•
Update Flash — Allows loading new code into the Flash memory of the
selected chassis. Refer to
“Switch Faceplate Display (Special>Update
Flash)” on page 2-73
.
•
Toggle Beacon — Cause the Heartbeat LED on the selected chassis to blink
at a very rapid rate and the application displays a small blinking beacon icon.
This is useful when you want to make sure that a particular physical chassis
installed at a location which contains multiple switches. Toggle the beacon to
On, a small red blinking icon appears over the heartbeat LED dot on the
faceplate icon. The physical Heartbeat LED on the selected chassis changes
from the normal blink rate and blinks at a very fast rate. The Heartbeat LED
will continue to operate in this state until it is changed back. The blink rate is
not automatically changed back when the application is exited. When the
beacon icon is blinking, selecting the toggle beacon command removes the
small red blinking icon on the faceplate window and returns the physical
LED on the selected chassis to the normal heartbeat pattern.
•
Restore Saved Config — Commands the selected Switch chassis to revert
from the current timeout values and modes to the latest values and modes
saved. When you Apply configuration changes to the Switch chassis it does
not save the configuration unless the fabric is archived.
•
Default Config — Commands the selected Switch chassis to revert to the
default configuration settings as set at the factory.
•
Zero Port Counts — Zero Port Counts causes all counters in the Switch
Statistics table (except for the resets field) to be zeroed.
•
Clear Zoning Backup — Erase the WWN name server backup data on this
switch. For additional information regarding WWN name server data
backup, refer to
“Credit Chaining” on page 2-99
.
•
Reset — Allows you to perform a Reset operation on the selected Switch
chassis. Refer to the Update Flash and Reset paragraphs later in this section.
Help
The Help menu contains the following entries:
Summary of Contents for SANbox-16
