Qlogic QLogic 9000 Series, Installation Manual, Page: 53 / 168

2–Planning
Security
59229-05 A 2-17
b. Create an ISL group (Group_ISL_1) in Security_Set_1 with Switch_1
and Switch_2 as members. The Switch_1 secret must be shared with
the Switch_2 security database.
2. Configure security on HBA_1 using the appropriate management tool.
Logins between the Switch_1 and HBA_1 will be challenged for their
respective secrets. Therefore, the secrets for Switch_1 and HBA_1 that you
configured on Switch_1 must also be configured on HBA_1.
3. Save and activate Security_Set_1 on Switch_1.
4. Create a security set (Security_Set_2) on Switch_2. Create an ISL group
(Group_ISL_2) in Security_Set_2 with Switch_1 and Switch_2 as members.
This is a replication of the entries in ISL group in the Switch_1 security
database.
5. Save and activate Security_Set_2 on Switch_2.
Switch_1 Node WWN: 10:00:00:c0:dd:07:e3:4c
Authentication: CHAP
Primary Hash: MD5
Primary Secret: 0123456789abcdef
Binding: None
Switch_2 Node WWN: 10:00:00:c0:dd:
07:e3:4e
Authentication: CHAP
Primary Hash: MD5
Primary Secret: abcdef abcdef012
Binding: None
Switch_2 Node WWN: 10:00:00:c0:dd:07:e3:4c
Authentication: CHAP
Primary Hash: MD5
Primary Secret: 0123456789abcdef
Binding: None
Switch_1 Node WWN: 10:00:00:c0:dd:07:e3:4e
Authentication: CHAP
Primary Hash: MD5
Secret: abcdef abcdef012
Binding: None