Qlogic QLogic 9000 Series Installation Manual Download Page 132

Page: 132 / 168

5–Customer Replaceable Units

Replacing Power Supply Blades

5-20

59229-05 A

Installing a Power Supply Blade

To install a Power Supply blade, do the following:

Confirm that the CPU blade Heartbeat LED is showing the normal 1 blink
per second. This allows the switch to correctly report power supply status.

Open the Power Supply blade latch and slide the blade into the chassis until
it contacts the midplane connector.

Rotate the latch right-to-left to lock the Power Supply blade in place.

Move the Power Supply blade On/Off switch to the On position. Observe
that the Power Supply blade Power LED is illuminated.

Confirm the Power Supply blade status. Open a Telnet session and enter the
Show Chassis command to display the operational status of the Power
Supply blade.

Summary of Contents for QLogic 9000 Series









































































































































































Search results

Summary of Contents for QLogic 9000 Series

Reviews:

Qlogic QLogic 9000 Series, Installation Manual, Page: 132 / 168

Search results

Summary of Contents for QLogic 9000 Series

Reviews: