Qlogic QLogic 9000 Series, Installation Manual, Page: 101 / 168

4–Diagnostics/Troubleshooting
I/O Blade Diagnostics
59229-05 A 4-7
I/O Blade Diagnostics
Figure 4-2 illustrates the I/O blade diagnostic process. For port errors indicated by
the Logged-In LED, refer to “FC Port Diagnostics” on page 4-8 . If the corrective
action is not successful, contact you authorized maintenance provider.
Figure 4-2 I/O Blade Diagnostic Process
Chassis
Fault LED
I/O Blade
Fault LED
Show Blade IOx
command or
Enterprise Fabric
Suite 2007 to
display detail
On
On
Hotswap
LED
Off
Remove
and
Reinstall
I/O Blade
Off
I/O Blade
Power LED
Off
On or
flashing
On
Check I/O
blades and
other
blades
Replace I/O blade as
needed. See
Replacing Power
Supply Blades .