Switch Command Line Interface
Groups and Commands
D000103-000 E
1-81
smDynamicPlt
Set/display dynamic packet lifetime values.
Syntax:
Options:
Sample Output:
NOTES:
Setting values to numbers greater than 19 give an effectively-infinite packet
lifetime. The subnet manager must be running to display dynamic packet lifetime
values.
smDynamicPlt [index] [plt]
index
The index of the entry in the table to be changed. Range is 1-9..
plt
The packet lifetime value. The range is 0-63.
-> smDynamicPlt
Index: 1 PLT Value: 16 (~268435 usec)
Index: 2 PLT Value: 17 (~536870 usec)
Index: 3 PLT Value: 17 (~536870 usec)
Index: 4 PLT Value: 18 (~1073741 usec)
Index: 5 PLT Value: 18 (~1073741 usec)
Index: 6 PLT Value: 18 (~1073741 usec)
Index: 7 PLT Value: 18 (~1073741 usec)
Index: 8 PLT Value: 19 (~2147483 usec)
Index: 9 PLT Value: 19 (~2147483 usec)
Dynamic packet lifetime values for pathrecord queries are enabled
(use the smOptionConfig command to change)
-> smDynamicPlt 1 15
Index: 1 PLT Value: 15 (~134217 usec)
Index: 2 PLT Value: 17 (~536870 usec)
Index: 3 PLT Value: 17 (~536870 usec)
Index: 4 PLT Value: 18 (~1073741 usec)
Index: 5 PLT Value: 18 (~1073741 usec)
Index: 6 PLT Value: 18 (~1073741 usec)
Index: 7 PLT Value: 18 (~1073741 usec)
Index: 8 PLT Value: 19 (~2147483 usec)
Index: 9 PLT Value: 19 (~2147483 usec)
Dynamic packet lifetime values for pathrecord queries are enabled
(use the smOptionConfig command to change)
