manualshive.com logo in svg

Qlogic QLogic 12000 Series, Reference Manual, Page: 126 / 144

Share
Download
Qlogic QLogic 12000 Series Reference Manual Download Page 126

Switch Command Line Interface

Groups and Commands

1-118

D000103-000  E

Options:

Sample Output:

NOTE:

This command ONLY works on switches supporting 8X link 
aggregation. This command sets link aggregation so that Internal 
AND External switching will be at the specified width. Each 8X port 
is 2 aggregated 4X ports (i.e. a DUO), where one will be reported as 
a 8X port, and the other port is reported as disabled. Each of the two 
aggregated 4X ports must be connected to another enabled 8X Duo 
to establish an 8X link. To force links to only operate at 8X, use the 
'8X' option. Calling this function without a parameter will display the 
ports' current values.
Calling this function with the [-bounce] option disruptively brings 
active links down and back up so the links use the new setting 
immediately. Otherwise the new setting will be used the next time 
links retrain.

ismIslSetWidth

View/Set/Unset chassis link width (except external ports).

Syntax:

linkWidth

1=1X, 2=4X, 3=1X/4X, 4=8X, 5=1X/8X, 6=4X/8X, 7=1X/4X/8X

-bounce

Brings the active links down and back up if a new value is set.

-> ismChassisSetWidth

L101P01 link width supported: 4X

L101P02 link width supported: 4X

L101P03 link width supported: 4X

L101P04 link width supported: 4X

L101P05 link width supported: 4X

L101P06 link width supported: 4X

L101P07 link width supported: 4X

L101P08 link width supported: 4X

L101P09 link width supported: 4X

L101P10 link width supported: 4X

L101P11 link width supported: 4X

L101P12 link width supported: 4X

L101P13 link width supported: 4X

L101P14 link width supported: 4X

L101P15 link width supported: 4X

L101P16 link width supported: 4X

....

ismIslSetWidth [linkWidth] [-bounce]

Summary of Contents for QLogic 12000 Series

















































































































































Reviews:

No comments