manualshive.com logo in svg

Qlogic QLogic 12000 Series, Reference Manual, Page: 91 / 144

Share
Download
Qlogic QLogic 12000 Series Reference Manual Download Page 91

Switch Command Line Interface

Groups and Commands

D000103-000  E

1-83

the value to 0 to disable this feature. The subnet manager must be running to display 
this information.

smAppearanceMsgThresh

Displays the threshold for appearance and disappearance messages.

Syntax:

Options:

Sample Output:

NOTES:

 This command sets the threshold for the number of fabric appearance and  

disappearance log messages that may be logged as NOTICEs per sweep by the 
SM. A value of zero causes all such messages to be logged at the NOTICE level. 
A value greater than zero will cause the priority of any subsequent  messages to 
be logged at the INFO priority. The subnet manager must be running to display this 
information.

smPmBmStart

Allows the user to set/display whether performance manager and baseboard manager starts along with 
the subnet manager.

Syntax:

Options:

smAppearanceMsgThresh

None.

-> smAppearanceMsgThresh

Message Threshold is 0 (disabled).

-> smAppearanceMsgThresh 3

-> smAppearanceMsgThresh

Message Threshold is 3 messages/sweep.

smPmBmStart [enable] [disable]

enable

Enable the start of the PM and BM at SM start-up.

disable

Disable the start of the PM and BM at SM start-up.

Summary of Contents for QLogic 12000 Series

















































































































































Reviews:

No comments