Qlogic InfiniPath, Install Manual

Page: 63 / 74

3 – Software Installation
Installation Troubleshooting
IB0056101-00 C 3-29
Q
3. Run ipath_checkout or other OpenFabrics test program to verify that the
InfiniPath card(s) work properly.
4. Unload the InfiniPath and OpenFabrics modules with the command:
# /etc/init.d/infinipath stop
5. Remove the InfiniPath kernel components with the command:
$ rpm -e infinipath-kernel --nodeps
The option
--nodeps
is required because the other InfiniPath RPMs depend
on
infinipath-kernel
.
6. Verify that no InfiniPath or OpenFabrics modules are present in the
/lib/modules/$(uname -r)/updates
directory.
7. If not yet installed, install the InfiniPath and OpenFabrics modules from your
alternate set of RPMs.
8. Reload all modules by using this command (as root):
# /etc/init.d/infinipath start
An alternate mechanism can be used, if provided as part of your alternate
installation.
9. Run an OpenFabrics test program, such as
ibstatus
, to verify that your
InfiniPath card(s) work correctly.
This information is repeated in appendix C in the InfiniPath Interconnect User Guide .
3.22
Installation Troubleshooting
If you have any difficulties installing the hardware or software, please see
appendix C in the InfiniPath Interconnect User Guide . This Troubleshooting section
contains information on problems related to installation, system administration, and
InfiniPath MPI issues.