Qlogic InfiniPath, Install Manual

Page: 61 / 74

3 – Software Installation
Customer Acceptance Utility
IB0056101-00 C 3-27
Q
6. Verify ability to
mpirun
jobs on nodes.
7. Run bandwidth and latency test on every pair of nodes and analyze results.
The possible options to
ipath_checkout
are:
-h, --help
Displays help messages giving defined usage.
-v, --verbose
-vv, --vverbose
-vvv, --vvverbose
These specify three successively higher levels of detail in reporting results of tests.
So, there are four levels of detail in all, including the case of where none these
options are given.
-c, --continue
When not specified, the test terminates when any test fails. When specified, the
tests continue after a failure, with failing nodes excluded from subsequent tests.
--workdir=DIR
Use DIR to hold intermediate files created while running tests. DIR must not already
exist.
-k, --keep
Keep intermediate files that were created while performing tests and compiling
reports. Results will be saved in a directory created by
mktemp
and named
infinipath_XXXXXX
or in the directory name given to
--workdir
.
--skip=LIST
Skip the tests in
LIST
(e.g. --skip=2,4,5,7 will skip tests 2, 4, 5, and 7)
-d, --debug
Turn on
-x
and
-v
flags in bash.
In most cases of failure, the script suggests recommended actions. Please see the
ipath_checkout
man page for further information and updates.
Also refer to appendix C (The Troubleshooting Appendix) in the InfiniPath
Interconnect User Guide.